1. Verification of the condition of the vehicle. It must be free of damage for vehicle test fit to proceed.
2. Place measuring point stickers on the areas surrounding the lamps to be test fitted.
(see figure.01)
3. Measure gaps and depths between the lamps and the surrounding areas, record data and take photographs.
(see figure.02)
4. Remove the original lamp from the vehicle.
(see figure.03)
5. Install the testing lamps on the vehicle.
6. Measure gaps and depths between the lamps and the surrounding areas, record data and take photographs.
7. Remove the testing lamps from the vehicle.
8. Re-install the original lamps back to the vehicle's pre-VTF condition.
9. Remove the stickers and clean off any residue.
The whole process will take an estimated 4 to 5 hours and is conducted by two well-trained engineers who have more than 10 years of vehicle test fit experience combined. Don't worry about your vehicle getting damaged because it will be in great care.
GENERAL INFO
VTF PROCEDURE
CONTACT US
REGISTER YOUR VEHICLE